DTC button = DSC OFF
In conformity with new legal regulations the DTC button now displays the message "OFF" along with a symbol representing a skidding vehicle. The same symbol appears in the instrument cluster's indicator lamp (consult Owner's Handbook).
The DTC button can be used to select 3 switching states:
- DTC button not pressed after terminal change: DSC in operation (default)
- Press DTC button briefly: DTC operating (TRACTION display appears in the tachometer)
- Press DTC button for longer period: DSC and ASC deactivated, ABS and ABD-X remain active on AWD vehicles (DSC OFF display in the tachometer)
NOTE:
Pressing the button for an excessively long period will result in a fault (DTC) entry!
If pressure is maintained on the Dynamic Drive or DTC button for more than 10 seconds a fault (DTC) will be registered by the Integrated Chassis Management (ICM). DSC assumes operation.
If pressure is maintained on the Dynamic Drive or DTC button for more than 10 seconds a fault (DTC) will be registered by the Integrated Chassis Management (ICM). DSC assumes operation.