Warning! Rolling motion on commissioning

During commissioning, the vehicle performs very strong and rapid rolling motions. For this reason, no persons may be located directly at the vehicle, particularly in the proximity of moving vehicle components. There must be no objects underneath the vehicle or in the wheel arches! The commissioning procedure may only be carried out with the vehicle standing of a firm, flat surface with all four wheels on the ground. Under no circumstances may the commissioning be carried out when the vehicle is on the following surfaces:

• Vehicle hoists
• Wheel alignment units
• Shock absorber test units
• Brake test units
• Power output test units

Disregarding these instructions could put lives at risk!