Mounting Engine On Assembly Stand (N52K)
Special tools required:
- 00 1 450
- 11 3 370
- 11 4 440
- 11 9 261
- 11 9 265
For the following special tools, refer to MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS -- 128I .
For the following special tools, refer to ENGINE- SPECIAL TOOLS (N52K) .
IMPORTANT:
Aluminum screws/bolts must be replaced each time they are released.
The end faces of aluminum screws/bolts are painted blue for the purposes of reliable identification.
Jointing torque and angle of rotation must be observed without fail (risk of damage).
The end faces of aluminum screws/bolts are painted blue for the purposes of reliable identification.
Jointing torque and angle of rotation must be observed without fail (risk of damage).
Necessary preliminary tasks: