32 00... Moving vehicle into design position

Necessary preliminary tasks: 

• Move VEHICLE INTO NORMAL POSITION 

• Version with air spring system: 
  • Remove ignition key
  • If necessary, pull fuse for air supply system control unit
• Add/distribute weights in area of spring struts until the VEHICLE RIDE HEIGHT is within the tolerance.
  • Front axle:  refer to TECHNICAL DATA - RIDE HEIGHT (RWD) (or TECHNICAL DATA - RIDE HEIGHT (AWD) )
  • Rear axle:  refer to TECHNICAL DATA - RIDE HEIGHT (RWD) (or TECHNICAL DATA - RIDE HEIGHT (AWD) )