Mike's Workshop Manuals: Service manuals for every vehicle
Home >> BMW >> 2012 >> X1 >> Repair and Diagnosis >> External Pages >> Different car >> Section 414 (Steering And Wheel Alignment - Repair) >> Electronic Chassis Alignment >> 32 00... Test conditions for chassis/wheel alignment check

32 00... Test conditions for chassis/wheel alignment check

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Observe the following test conditions prior to the chassis/wheel alignment check:

  1. Only BMW approved wheel and tire combinations may be installed on the vehicle
  2. Correct tread depth. The tread depth for each axle may differ from left to right by max. 1-2 mm.
  3. Correct tire pressure (see label on vehicle).
  4. All chassis and suspension components must be technically OK.
  5. Condition of suspension and shock absorbers OK: Visually inspect for breakage, etc.
  6. Vehicles with self-levelling suspension: Pull fuse of air supply system so that there is no controlling down or up.
scientia non olet · About Mike's Workshop Manuals