32 00 620 Adjusting rear axle: Notes

IMPORTANT: Altered procedure from previous wheel alignment!

Turning the adjusting screw on the swinging arm or on the wishbone always results in a camber and toe change!

Separate camber or toe adjustment is no longer possible!

Specific camber and toe adjustment is only possible with the aid of the following diagram!

NOTE: Vehicles with ACC only:

After an adjustment of the rear axle which alters the driving axis, check adjustment of ACC sensor. See LRR SENSOR or FRR SENSOR .

Vehicles with rear axle slip angle control only:

Carry out adjustment of rear axle only with aid of BMW Diagnosis and Information System