23 23 Synchronization (GS6-37BZ/DZ/MECH)
WARNING: This page is about a different variant/trim than selected.
SYNCHRONIZATION SPECIFICATION
| Distance between synchronizer ring and clutch body | ||
| New condition | ||
| 1st/2nd gear | mm | 1.3... 2.05 |
| Wear limit size | mm | 1.0 |
| 3st/4nd gear | mm | 0.8... 1.40 |
| Wear limit size | mm | 0.7 |
| 5/6st gear | mm | 0.95... 1.5 |
| Wear limit size | mm | 0.75 |
| Reverse gear | ||
| New condition | mm | 0.65... 1.25 |
| Max. wear limit size | mm | 0.5 |