Structure and inner electrical connection
The hall effect sensors are non-contact sensors. For safety reasons, the hall effect sensors supply an opposing signal (redundancy). The second sensor supplies the mirrored voltage values at all operating points.
| Item | Explanation |
|---|---|
| 1 | Hall effect sensor 1 |
| 2 | Hall effect sensor 2 |
| 3 | Electromotive throttle actuator with throttle valve |
| 4 | Electronic component with evaluation electronics |
CONNECTOR PIN REFERENCE
| Pin | Explanation |
|---|---|
| SIG 1 | Hall effect sensor signal 1 |
| U | Voltage supply for hall effect sensors |
| PWM 1 | Activation, electromotive throttle actuator |
| SIG 2 | Hall effect sensor signal 2 |
| PWM 2 | Activation, electromotive throttle actuator |
| Kl. 31 | Terminal 31, ground connection (DME) |