Mike's Workshop Manuals: Service manuals for every vehicle
Home >> BMW >> 2011 >> 1M >> Repair and Diagnosis >> External Pages >> Different car >> Section 2633 (General Electrical System - Repair) >> Plug Connection, Terminal, Power Distribution Box >> 61 13... Opening plug housings and removing contacts of different plug systems >> 61 13... In-line connectors, 15-pin, System D2.5

61 13... In-line connectors, 15-pin, System D2.5

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

Carefully pull external connector (1) in area of retaining lugs (2) apart slightly.

Fig 1: Pulling External Connector In Area Of Retaining Lugs
G08509669Courtesy of BMW OF NORTH AMERICA, INC.

Pull internal connector (3) until limit position in direction of arrow.

Fig 2: Pulling Internal Connector
G08509670Courtesy of BMW OF NORTH AMERICA, INC.

With special tool 61 0 303 press back retaining hook(4) of corresponding contact and pull out cable with contact.

Fig 3: Pressing Retaining Hook Using Special Tool (61 0 303)
G08509671Courtesy of BMW OF NORTH AMERICA, INC.