61 35 080 Removing And Installing/Replacing Control Unit/Module For Left Or Right Seat Adjustment

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection) .

NOTE: Move seat completely towards rear/top.

Unlock metal lug (1) towards front and remove control unit/module for seat adjustment (2) towards bottom.

Disconnect all associated plug connections.

Fig 1: Identifying Control Unit/Module & Metal Lug

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure control unit/module for seat adjustment (1) is correctly seated in mounting (2).

Guides (3) and metal lug (4) must not be damaged.

Fig 2: Identifying Guides & Metal Lug With Control Unit/Module

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out vehicle programming/coding .