32 00... Moving vehicle into normal position
Necessary preliminary tasks:
- Check compliance with test conditions, bring vehicle to a stop if necessary, see 32 00... Test conditions for chassis/wheel alignment check .
- Version with air spring system: Carry out ride-height-calibration
- Check vehicle interior and luggage compartment (incl. luggage compartment recess) for load, unload vehicle if necessary
- Introduce DIN load (refer to 32 00 CHASSIS/WHEEL ALIGNMENT - NORMAL POSITION E83 ) into vehicle
- Determine vehicle ride height
NOTE:
If the vehicle ride height is not inside the tolerance (refer to 31 00 FRONT AXLE - RIDE HEIGHT E83
), the vehicle must be repaired (coil spring/leakage).