Preparation for installation
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
Prepare plastic nozzle(s) for shaping adhesive bead (when not using the standard nozzle C), can be cut to size during the air drying time.
Lay a sample bead of approx. 50 mm; if OK, apply immediately to window glass.
- Interruption must be < 5 seconds (incorrect mixture ratio).
Glue cartridge must be vertical to window glass.
Black ceramic glass impermeable to UV light is located on the peripheral zone of the inside edge of the window to protect the adhesive bead.
Ceramic glass must not be damaged and must be treated as follows.
Treatment of ceramic glass surface (inside of window):
| Adhesive (with part numbers) | Treatment |
|---|---|
Repair kit:
Glue cartridge:
|
|