Mike's Workshop Manuals: Service manuals for every vehicle
Home >> BMW >> 1995 >> 740i >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Technical Service Bulletins >> Transmission Control Systems >> AGS Transmission Program Functions (24 01 95 (4259))

AGS Transmission Program Functions (24 01 95 (4259))

Publication date: 1996-04-01
Reference number: 24 01 95 (4259)
Supersedes refnos: 24 01 95

AGS TRANSMISSION PROGRAM FUNCTIONS

AGS TRANSMISSION PROGRAM FUNCTIONS

TECHNICAL SERVICE BULLETIN

Reference Number(s): 24 01 95, Date of Issue:  April, 1996
BMW: 540iA vehicles (with M60) produced 9/93 - 5/95; 740iA/iLA (E38) vehicles (with M60) produced 9/94 - 5/95; 750iLA (E38) vehicles with (M73) produced 1/95 - 6/95
GROUP: 24 - Automatic Transmission
Superceded Bulletin(s): 24 01 95 (4259), Date of Issue:  August, 1995
NOTE: This Service Information Bulletin supersedes S.I. 24 01 95 (4259) dated August, 1995; please remove it from your S.I. binder and discard.

SUBJECT

AGS transmission program functions

COMPLAINT

  1. Customer indicates one of more of the following:
    1. - Does not like the current shift program.
    2. - Transmission holds gear too long/hangs in gear.
    3. - Shift points are unpredictable.
    4. - Down-shifts while going downhill and braking (hill program).
    5. - Unexpected shift when going uphill (hill program)
  2. Trans Program displayed on the instrument cluster matrix display and any of the following fault codes may be stored in the transmission control module: -1, 4, 5, 29, and 51 -100 -101

CORRECTION

To address the above listed complaints, several changes have been made to the original AGS transmission shift programs as a result of concerns expressed by our customers and the media.

The latest program changes were introduced into production vehicles and can be identified as indicated:

SOFTWARE INFORMATION

Model Production Change Date AGS Identification Screen Display - Software Number
E38 - 750iLA June 19, 1995 2323
E38 - 740i/iLA May 3, 1995 2929
E34 - 540iA May 16, 1995 2929

The following information will provide a brief explanation of the various functions associated with the AGS system and the changes made:

FAST-OFF FEATURE

During rapid deceleration, the transmission holds the gear that it currently is in until the driver reaccelerates.

Software change:  Elimination of Fast-off function to avoid the sensation of "hanging up in gear."

DRIVE AWAY EVALUATION

The AGS system selects the appropriate shift program based on the amount of acceleration that occurs during take off. (i.e., A full throttle acceleration will select the "Sport" program. If kickdown is reached, the "Extreme Sport" program is selected).

As an example: If a fast acceleration from a toll booth occurs, the transmission will remain in a sports mode oriented program for an extended period of time, even if the driver has already backed off the throttle.

Software change:  Drive-away evaluation function has been dampened so that a full throttle acceleration selects the "Economy" program and kickdown will select the "Sport" program.

KICK FAST FEATURE

The AGS system is equipped with four major drive programs:

  1. Extreme Economy
  2. Economy
  3. Sport
  4. Extreme Sport

Based on how fast the accelerator pedal is depressed, one of these programs will be selected.

Example: when accelerating to switch lanes or to pass, a more sport oriented program will be selected based on the vehicle speed and the amount of acceleration. In most instances a two gear downshift will occur. Due to a more sport oriented drive program, the transmission will also remain in a lower gear for an extended period of time, even though the driver has already backed off the throttle.

Software change:  Eliminated "Extreme Sport" program which addresses the sensation that the transmission "hangs up in gear." 5-4, 4-3 and 3-2 downshift points on full throttle acceleration have been changed to allow for a single gear downshift at higher speeds, making the car feel more responsive. A two gear downshift is still possible if the accelerator pedal is quickly depressed to kickdown.

DRIVER EVALUATION

The AGS system evaluates the driver's use of the brake, vehicle speed, amount of throttle applied and the use of kickdown. Based on this evaluation the AGS system selects a drive program. If the driving style is varied (i.e., playing with the accelerator pedal, randomly accelerating hard for a short time period) the AGS system may misinterpret the driver's intention and select a more sport oriented drive program with higher shift points. By raising the shift points, the transmission will remain in a lower gear for an extended time period.

Software change:  Kickdown and brake evaluation have been eliminated and a faster reset to the "Extreme Economy" program will occur.

DOWNHILL RECOGNITION

When driving downhill with vehicle road speed increasing, the AGS system will down shift into the next lower gear once the brake is applied to support engine braking.

Software change:  Elimination of downshifting to next lower gear. Transmission will hold the current gear to prevent an upshift.

UPHILL RECOGNITION

When driving uphill the transition into the "Hill program" mode is usually associated with a downshift into the next lower gear. The hill program will also hold the current gear longer to prevent a pendulum shift when going uphill.

Software change:  A downshift will not occur based on going into the "hill" program but rather on the shift points of the currently selected drive program.

PROCEDURE

In case of customer complaint:

  1. Verify that the latest version software is installed, as per the table above.
  2. Install the latest AGS transmission EPROM if the tester software number or the data status does not reflect what is shown in the table above. Please refer to TECHNICAL SERVICE BULLETIN 24 05 95 (4294) for instructions on removing and installing the EPROM.
  3. Once the new EPROM is installed, clear the adaptation values in the control module using the MoDiC or DIS. To clear adaptation values, select:
    1. "3 Service Functions"
    2. "4 Pressure - adaptation values"
    3. depress -> button to activate the clear function.

PARTS INFORMATION

PARTS INFORMATION

Part Number Description
01 00 1 469 154 EPROM 540iA with AGS
01 00 1 469 155 EPROM 750iLA (E38) with AGS
01 00 1 469 156 EPROM 740i/iLA (E38) with AGS

WARRANTY INFORMATION

Parts and labor will be reimbursable under the terms of the applicable BMW New Car Limited Warranty.

WARRANTY INFORMATION

Defect Code Labor Operation / Description Labor Allowance
24 00 26 63 00 00 51 094 - Check software number and replace EPROM in EGS/AGS control module 7 Flat Rate Units