Lane Change Assistance Control Module -J769- / -J770-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2025 Audi SQ8, 2025 Audi RS Q8, and 2025 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Release the retainers on the shield -1- -arrows-.
-- Remove the shield -1- from the lane change assistance control module -2-.
-- Release and disconnect the connector -1-.
-- Release the retaining tabs -2- at the center of the bumper cover mount.
-- Remove the lane change assistance control module -3- from the bumper cover mount -arrow-.