Guidelines For Clean Working Conditions

Even small amounts of contamination can result in malfunctions and leaks. That is why the following guidelines for clean working conditions must be ensured with all procedures:

• Thoroughly clean the connection locations/maintenance openings and the area around them prior to loosening/opening.
• Use lint-free cleaning cloths.
• Use clean plugs from the Engine Bung Set :VAS 6122  to immediately seal any lines, connections, and components that have been opened.
• Place removed components on a clean surface and cover them using lint-free cleaning cloths.
• Carefully cover or seal open components.
• Immediately remove leaking liquids and clean the affected areas.
• Only install clean components: remove the replacement parts from their packaging just before installing them and wear clean gloves.
• Remove any transport or protective packaging and covers just before installing the component.
• Protect the disconnected electrical or optical connectors from dirt and moisture and only connect when they are dry.

Cleaning the vehicle and motor:

• When cleaning the vehicle or motor using a pressure washer, never direct the stream of water onto electrical components or connectors.