Front Peripheral Camera -R243-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Remove the center end panel. Refer to OVERVIEW - RADIATOR GRILLE .
-- Release and disconnect the connector from the Front Peripheral Camera -R243- -1-.
-- Remove the bolts -4-.
-- Remove the retaining plate -5-.
-- Remove the Front Peripheral Camera -R243- -1-.
-- If necessary, release the retaining tabs on the trim -2- and unclip the trim -2- forward from the radiator grille.
-- If necessary, remove the screws -3- and remove the holder -6- from the radiator grille.