Lane Change Assistance Control Module -J769- /Lane Change Assistance Control Module 2 -J770-, REMOVING AND INSTALLING, A7 SPORTBACK: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear bumper cover. Refer to the appropriate service information .
-- Release the retainer -2- with a screwdriver -1-.
-- Remove the lane change assistance control module -4- from the bracket -3- in the direction of -arrow-.
-- Disconnect the connector -5-.
All vehicles excluding RS 7 Sportback:
-- Release the retainers in the direction of -arrows-.
-- Release and remove the lane change assistance control module -1- from the shield -2-.