Special Tools

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi SQ8, 2022 Audi RS Q8, 2022 Audi Q8, 2021 Audi SQ8, and 2021 Audi RS Q8. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Wrench - Driver: T10072

Fig 1: Identifying Socket Wrench T 10072
Courtesy of AUDI OF AMERICA, LLC
Digital Caliper: VAS6335

Courtesy of AUDI OF AMERICA, LLC
Calibration Tool: VAS6350A

Courtesy of AUDI OF AMERICA, LLC
Calibration Tool - Lane Change Calibration Tool: VAS6350/4
Calibration Tool - R8 Wheel Adapters: VAS6350/5
Calibration Tool - Wheel Center Mounting: VAS6350/1A
Calibration Tool - Spacing Laser: VAS6350/2A
Calibration Tool - Linear Laser: VAS6350/3A

Fig 2: Identifying Linear Laser
Courtesy of AUDI OF AMERICA, LLC
Calibration Tool - Lane Change Calibration Tool: VAS6350/4
Setting Device Basic Set: VAS6430/1 or Setting Device - Basic Set: VAS6430/1A

Fig 3: Identifying Setting Device VAS 6430
Courtesy of AUDI OF AMERICA, LLC
ACC Reflector Mirror: VAS6430/3
Night Vision Calibration Tool: VAS6430/6
Setting Device Basic Set - Base Frame: VAS6430/7
Setting Device - Adapter: VAS6430/9 , only for surface mounted hoist with a dimension greater than 300 mm.
Calibration Board Laser Scanner: VAS6430/12
Mounting: VAS6430/12-1
Scraper Set: VAS6845

Courtesy of AUDI OF AMERICA, LLC
Screwdriver with T-bar: VAS272001
Wheel Alignment Computer - Camera: VAS701001/1