Protective Window, Removing

• The Night Vision System Camera -R212- is removed
• If the protective window is no longer watertight due to damage, the Night Vision System Camera -R212- must be completely replaced.

-- Release the retainers in the direction of -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove trim -1-.

-- Press the retaining tab -1- and turn the cover -2- 90° counter-clockwise -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the cover, protective window -3- and the seal from the camera.

• Replace the seal after every removal.

Installing 

Install in the reverse order of removal while noting the following:

-- Calibrate the Night Vision System Camera -R212-. Refer to INFRARED SYSTEM, CALIBRATING .

Tightening Specifications 

• Refer to OVERVIEW - NIGHT VISION SYSTEM CAMERA