Front Peripheral Camera -R243-, REMOVING AND INSTALLING: Removing
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Remove the lock carrier cover. Refer to OVERVIEW - BUMPER COVER .
-- Disconnect the connector -1-.
-- Remove the bolts -arrows-.
-- Remove the Front Peripheral Camera -R243- -3-.
Removing the mount and trim: vehicles before product improvement
-- Remove the center end panel. Refer to OVERVIEW - RADIATOR GRILLE .
-- Release the catches from the trim -2- and remove the trim -2- forward.
-- Remove the bolts -3- and remove the mount -6-.
Removing the mount and trim: vehicles from product improvement
-- Remove the center end panel. Refer to OVERVIEW - RADIATOR GRILLE .
-- Release the catches -1 and 4- and remove the trim -2- forward.
-- Remove the bolts -arrows- and then remove the mount -3-.