Lane Change Assistance Control Module -J769- / Lane Change Assistance Control Module 2 -J770-, Removing And Installing, A7 SPORTBACK: Removing
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2022 Audi S7, 2022 Audi RS 7 Sportback, 2022 Audi A7 e Quattro, 2022 Audi A7 Quattro, and 2021 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Release the retainer -2- with a screwdriver -1-.
-- Remove the lane change assistance control module -4- from the bracket -3- in direction of -arrow-.
-- Disconnect the connector -5-.
All Vehicles Excluding RS 7 Sportback:
-- Release the retainers in direction of -arrows-.
-- Release and remove the lane change assistance control module -1- from the shield -2-.