Windshield Projection Head Up Display Control Module -J898-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5, 2022 Audi RS 5, 2022 Audi A5 Quattro, 2021 Audi S5, and 2021 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the windshield. Refer to WINDSHIELD, REMOVING AND INSTALLING .

-- Press out the upper cover -2- from the instrument panel -1- in direction of -arrow- using the :T10383 .

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the frame -1-.

-- Cover the Windshield Projection Head Up Display Control Module -J898- -3- with a soft towel.

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

There is a risk of destroying the windshield projection head up display control module.

- Only remove the designated bolts from the control module.

- Never remove the bolts for the housing upper section.

-- Remove the bolts -1, 2, 4-.

-- Lift the Windshield Projection Head Up Display Control Module -J898- slightly and disconnect the connector.

-- Remove the Windshield Projection Head Up Display Control Module -J898-.