Lane Change Assistance Control Module -J769- / Lane Change Assistance Control Module 2 -J770-, Removing And Installing, A7 SPORTBACK: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S6, 2022 Audi A6 Quattro, 2021 Audi S6, 2021 Audi A6 Quattro, and 2020 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Release the retainer -2- with a screwdriver -1-.
-- Remove the lane change assistance control module -4- from the bracket -3- in direction of -arrow-.
-- Disconnect the connector -5-.
All Vehicles Excluding RS 7 Sportback:
-- Release the retainers in direction of -arrows-.
-- Release and remove the lane change assistance control module -1- from the shield -2-.