Guidelines For Clean Working Conditions
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S6, 2022 Audi A6 Quattro, 2021 Audi S6, 2021 Audi A6 Quattro, and 2020 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
Even small pieces of debris can cause faults. For this reason follow the rules of cleanliness when working:
- Thoroughly clean the connection locations/maintenance openings and the area around them prior to loosening/opening.
- Immediately seal off any open lines and connections with clean plugs, for example taken from the Engine Bung Set:VAS6122 .
- Place removed parts on a clean surface and cover them with lint-free cloths.
- Carefully cover or seal opened components if repairs are not performed immediately.
- Only install clean parts: remove the replacement parts from their packaging just before installing them. Do not use any parts that have been kept out of packaging (for example, in a toolbox).
- Do not work with compressed air when the system is open.
- Protect any disconnected connectors from dirt and moisture, and only connect them when they are completely dry.