Rear Window Spray Pattern, Checking
The spray pattern must meet the following specifications:
- Both points of impact are just above the wiper blades
- Even, precise spray jets
- Inner spray jet point of impact is approximately in the first quarter of the length of the wiper blade -image-.
- Outer spray jet point of impact is approximately in the middle of the length of the wiper blade or just above -image- (third quarter).
Procedure:
-- Activate the rear window washer system and assess the spray pattern.
-- If the spray pattern does not meet these specifications, adjust the spray nozzles. Refer to REAR WINDOW SPRAY NOZZLES, ADJUSTING .