Overview - Assembly Mounts

Fig 1: Exploded View Of Dual Clutch Transmission Mount

GWWA10-11614

Courtesy of AUDI OF AMERICA, LLC

Bolt
- 70 Nm
Tunnel Crossmember
- Removing and Installing. Refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING .
Stop
- For the transmission mount
Transmission Mount
- Removing and Installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING - 2.0L (DMSA) , TRANSMISSION MOUNT, REMOVING AND INSTALLING - 2.0L (DPAA) , TRANSMISSION MOUNT, REMOVING AND INSTALLING - 3.0L .
Transmission
Nut
- 20 Nm
Transmission Support
- Removing and Installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING - 2.0L (DMSA) , TRANSMISSION MOUNT, REMOVING AND INSTALLING - 2.0L (DPAA) , TRANSMISSION MOUNT, REMOVING AND INSTALLING - 3.0L .
Bolt
- 40 Nm
Bolt
- 20 Nm +90°
- Replace after removing
Nut
- 20 Nm