ABS Control Module -J104- /ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING: Notes
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
- Torque Wrench 1331 5-50Nm:VAG1331
- Brake Pedal Actuator:VAG1869/2 .
- Bleeder bottle from the Brake Charger/Bleeder Unit:VAS5234
- M10 plug or M12 from the Assembly Part Set:5Q0 698 311
- Safety Gloves
NOTE:
The transverse and longitudinal acceleration sensors are installed in the ABS Control Module -J104-. The sensors cannot be replaced.
If the ABS Control Module -J104- is faulty, it can be replaced separately.
If the ABS Hydraulic Unit -N55- is faulty, it must be replaced together with the ABS Control Module -J104-.