Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Audi >> 2023 >> Q8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Driver Assistance Systems) >> 98 Assistance Systems >> Sensors And Control Modules >> Night Vision System Camera -R212-, REMOVING AND INSTALLING >> Protective Window, Removing

Protective Window, Removing

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi SQ8, 2022 Audi RS Q8, 2022 Audi Q8, 2021 Audi SQ8, and 2021 Audi RS Q8. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

If the protective window is no longer water tight due to damage, the Night Vision System Camera -R212- must be completely replaced. Refer to Night Vision System Camera -R212-, REMOVING AND INSTALLING .

-- Push the retaining tabs -arrows- together and turn the cover approximately 90° counter-clockwise.

Fig 1: Turning Cover Approximately 90 Degrees Counter-Clockwise
GWWA44-10231Courtesy of AUDI OF AMERICA, LLC

-- Remove the cover, protective window and seal from the Night Vision System Camera -R212-.

NOTE:

Replace the seal after every removal.