Lane Change Assistance Control Module -J769- / -J770-, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi SQ8, 2022 Audi RS Q8, 2022 Audi Q8, 2021 Audi SQ8, and 2021 Audi RS Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Release the retainers on the shield -1- in direction of -arrows-.
-- Remove the shield -1- from the lane change assistance control module -2-.
-- Release and disconnect the connector -1-.
-- Release the retaining tabs -2- at the center of the bumper cover mount.
-- Remove the lane change assistance control module -3- from the bumper cover mount -arrow-.