Front Peripheral Camera -R243-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi SQ8, 2022 Audi RS Q8, 2022 Audi Q8, 2021 Audi SQ8, and 2021 Audi RS Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .
-- Remove the upper air guide. Refer to OVERVIEW - RADIATOR/RADIATOR FAN .
-- Release and disconnect the connector -5-.
-- Remove the bolts -4-.
-- Remove the retaining plate -6-.
-- Remove the Front Peripheral Camera -R243- -1-.
If the retainer -7- should be removed:
-- Remove the center end panel. Refer to OVERVIEW - RADIATOR GRILLE .
-- Release the retaining tabs on the trim -2- and unclip the trim -2- forward from the radiator grille.
-- Remove the bolt -3-.
-- Remove the retainer -7- from the radiator grille.