Guidelines For Clean Working Conditions

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi SQ8, 2022 Audi RS Q8, 2022 Audi Q8, 2021 Audi SQ8, and 2021 Audi RS Q8. However, it is still accessible from the selected car via links, so may be relevant.

It is necessary to maintain a high level of cleanliness when working on the ABS system. It is not permitted to use any products which contain mineral oil, such as oils, greases etc.
Thoroughly clean all connection points and their surrounding areas before loosening. However, do not use aggressive cleaning agents such as brake cleaner, gasoline, thinners or similar compounds.
Place the removed parts on a clean surface and cover them.
Carefully cover or seal opened components if repairs are not performed immediately (use plugs from Assembly Part Set: 5Q0 698 311 ).
Only use lint-free cloths.
Remove the replacement parts from their packaging just prior to installing them.
Only use parts in their original packaging.
If the system is open, do not work with compressed air and do not move the vehicle.
Make sure that brake fluid cannot get into the connectors.