Lane Change Assistance Control Module -J769- /Lane Change Assistance Control Module 2 -J770-, REMOVING AND INSTALLING: Removing

Courtesy of AUDI

-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Release the retainers on the shield -1- in direction of -arrows-.

-- Remove the shield -1- from the lane change assistance control module -2-.

-- Release and disconnect the connector -1-.

Courtesy of AUDI

-- Release the retaining tabs -2- at the center of the bumper cover mount.

-- Remove the lane change assistance control module -3- from the bumper cover mount in direction of -arrow-.