Overview - Lane Change Assistance
WARNING: This page is about a different car, the 2023 Audi e-tron S and 2023 Audi e-tron Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Left Shield
- Control Module for Left Front Object Detection Radar Sensor -J1088-
- Removing and Installing. Refer to Control Module for Left Front Object Detection Radar Sensor -J1088- /Control Module for Right Front Object Detection Radar Sensor -J1089-, REMOVING AND INSTALLING .
- Calibrating. Refer to FRONT CORNER RADAR, CALIBRATING .
- Bolt
- 2 Nm
- Quantity: 3
- Bracket
- For the Control Module for Front Object Detection Radar Sensor
- Bracket
- For the Control Module for Front Object Detection Radar Sensor
- Right Shield
- Bolt
- 2 Nm
- Quantity: 3
- Control Module for Right Front Object Detection Radar Sensor -J1089-
- Removing and Installing. Refer to Control Module for Left Front Object Detection Radar Sensor -J1088- /Control Module for Right Front Object Detection Radar Sensor -J1089-, REMOVING AND INSTALLING .
- Calibrating. Refer to FRONT CORNER RADAR, CALIBRATING .
- Lane Change Assistance Warning Lamp in Front Passenger Exterior Rearview Mirror -K234-
- Exterior Rearview Mirror
- Bracket
- For lane change assistance control module
- Right Shield
- Lane Change Assistance Control Module -J769-
- Removing and Installing. Refer to Lane Change Assistance Control Module -J769- / Lane Change Assistance Control Module 2 -J770-, REMOVING AND INSTALLING .
- Calibrating. Refer to LANE CHANGE ASSISTANCE, CALIBRATING .
- Bracket
- For lane change assistance control module
- Lane Change Assistance Control Module 2 -J770-
- Removing and Installing. Refer to Lane Change Assistance Control Module -J769- / Lane Change Assistance Control Module 2 -J770-, REMOVING AND INSTALLING .
- Calibrating. Refer to LANE CHANGE ASSISTANCE, CALIBRATING .
- Left Shield
- Lane Change Assistance Warning Lamp in Driver Exterior Rearview Mirror -K233-
- Exterior Rearview Mirror