Protective Window, Removing
WARNING: This page is about a different car, the 2023 Audi e-tron S and 2023 Audi e-tron Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Night Vision System Camera -R212- removed.
- If the protective window is no longer watertight due to damage, the Night Vision System Camera -R212- must be completely replaced. Refer to Refer to Night Vision System Camera -R212-, REMOVING AND INSTALLING .
-- Release the retainers in direction of -arrows-.
-- Remove trim -1-.
-- Press the retaining tab -1- and turn the cover 90° counter-clockwise -arrow-.
-- Remove the cover -2-, protective window -3-, and seal from the Night Vision System Camera -R212-.
Installing
Install in the reverse order of removal while noting the following:
- Replace the seal after removal.
-- Calibrate the night vision system camera after installing. Refer to INFRARED SYSTEM, CALIBRATING .
Tightening Specifications