Lane Change Assistance Control Module -J769- / Lane Change Assistance Control Module 2 -J770-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2023 Audi e-tron S and 2023 Audi e-tron Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Release the retainers in direction of -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Release and remove the shield -2- on the Lane Change Assistance Control Module -1-.

-- Release the retainers -4-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the lane change assistance control module -2- from the bracket -3- in direction of -arrow-.

-- Disconnect the connector -1-.