Guidelines For Clean Working Conditions
WARNING: This page is about a different car, the 2023 Audi e-tron S and 2023 Audi e-tron Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Even small pieces of debris can cause faults. For this reason follow the rules of cleanliness when working:
- Thoroughly clean the connection locations/maintenance openings and the area around them prior to loosening/opening.
- Immediately seal off any open lines and connections with clean plugs, for example taken from the Engine Bung Set:VAS6122 .
- Place removed parts on a clean surface and cover them with a lint-free cloth.
- Carefully cover or seal opened components if repairs are not performed immediately.
- Only install clean parts: remove the replacement parts from their packaging just before installing them. Do not use any parts that have been kept out of packaging (for example, in a toolbox).
- Do not work with compressed air when the system is open.
- Protect the disconnected connectors from dirt and moisture and only connect when they are dry.