Ignition Coils, Removing And Installing: Installing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Apply a thin bead of silicone paste around the seal hose for the ignition coil with power output stage -arrow-.
CAUTION:
Risk of destroying the ignition coil by using an unsuitable lubricant.
- Only use the specified silicone paste.
-- Push the ignition coils evenly onto the spark plugs using by hand (do not use any impact tools).
-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .