Control Module for Adaptive Cruise Control -J428-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Component location. Refer to COMPONENT LOCATION OVERVIEW - SENSORS AND CONTROL MODULES IN FRONT SECTION OF VEHICLE .
Vehicles with Radiator Shutter / RS 3
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
Vehicles without Radiator Shutter
-- Remove the bumper cover end plate. Refer to OVERVIEW - BUMPER COVER .
-- Remove the lower air duct for the radiator. Refer to OVERVIEW - LOCK CARRIER .
Continuation for all vehicles
-- Disconnect the connector -2-.
-- Release the retainers -3-.
-- Guide out the control module -1- from the mount.