Electro-Static Discharge Work Surface

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Requirement: make sure no particles, especially ones made of metal or other conductive materials, can enter the open headlamp housing or LED lamps.

Fig 1: ESD Work Surface
Courtesy of AUDI
Make sure also when handling the open housing that no oil, grease, silicone or other such materials comes into contact with the open headlamp components or the LED lamps because these substances can evaporate and cause a film to develop.
Do not touch the circuit board with bare hands, this may lead to migration.
ESD (electro static discharge) protection: Always follow the German Industry Standardization EN 613-40-5-1 when handling.
Components, assemblies or electronics that have fallen down cannot be used again.
ESD Work Surface:VAS6613 . Refer to ESD Work Surface VAS6613 .