Night Vision System Control Module -J853-, REMOVING AND INSTALLING, FROM 11/7/2016: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Remove the left front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Lift the carpet and push aside.
-- Remove the bolts -arrows-.
-- Release and disconnect the connectors -3-.
-- Q7 e-tron: detach the wire clip from the tab.
-- Disengage the Night Vision System Control Module -J853- -1- with the bracket -2- in the direction of the -arrow A- and remove it.
-- Remove the bolts -3-.
-- Remove the Night Vision System Control Module -J853- -1- from the bracket -2-.