Ignition Coils, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Mount the spark plug connector -2- all the way onto the ignition coil -1- by hand.
- The arrow markings on the spark plug connectors and on the ignition coils must face each other as shown.
CAUTION:
Incorrect lubricant increases the risk of destroying the ignition coils.
- Only use the silicone paste approved here.
-- Apply a thin bead of silicone grease all around the ignition coil seal tube -arrow-.
-- Press the ignition coils evenly onto the spark plugs by hand (do not use any striking tools).
There may be additional procedures depending on the model. Refer to IGNITION COILS, REMOVING AND INSTALLING .