Windshield Defogger Control Module -J505-, REMOVING AND INSTALLING, THROUGH DECEMBER 2016: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Vehicles with high-voltage system: switch off the function "parking heater" (deactivate). Refer to Owner's Manual.
-- Remove the glove compartment. Refer to STORAGE COMPARTMENTS AND COVERS .
-- With the ignition switched off, disconnect the ground cable from the battery. Refer to BATTERY .
-- Release and open the clamp guard -D-.
-- Mark the wires -F- and -H- for reinstallation.
-- Remove the nuts -E and G- and free up the wires.
-- Due to the risk of short circuit insulate the positive cable -H-.
-- Release the Windshield Defogger Control Module -J505- -A- from the bracket -C- downward.
-- Release and remove the connector -B-.