ABS Control Module -J104- /ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi SQ7, 2022 Audi S7, 2022 Audi Q7, 2021 Audi SQ7, and 2021 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
- Torque Wrench 1331 5-50Nm: VAG1331
- Brake Pedal Actuator: VAG1869/2 .
- Bleeder bottle from the Brake Charger/er Unit: VAS5234
- M10 plug -1- or M12 -2- from the Assembly Part Set: 5Q0 698 311
- Safety Gloves
NOTE:
If the ABS Control Module -J104- is faulty it can be replaced separately.
If the ABS Hydraulic Unit -N55- is faulty it must be replaced together with the ABS Control Module -J104-.