Window Guide, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5, 2022 Audi RS 5, 2022 Audi A5 Quattro, 2021 Audi S5, and 2021 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Install the window guide -A- on the door flange in the sequence -1 through 5-.

Courtesy of AUDI OF AMERICA, LLC

Step
1.	-- Position the upper edge of the window guide on the B-pillar door flange and push it forward in the direction of travel.
	The alignment pin -B- must engage in the window guide mount.
2.	-- Install the window guide on the door flange.
3.	-- Align the window guide on the A-pillar guide rail.
4.	-- Insert the seal -C- into the guide rail.
5.	-- Install the B-pillar trim (refer to B-PILLAR DOOR TRIM, REMOVING AND INSTALLING, FRONT ) and insert the seal -D- into the guide rail.

Install in reverse order of removal and note the following:

-- When inserting the guide rail must engage in the mount -2- -arrow-.