Lane Change Assistance Control Module -J769- / Lane Change Assistance Control Module 2 -J770-, Removing And Installing, A7 SPORTBACK: Removing

WARNING: This page is about a different car, the 2022 Audi RS 6 Avant and 2021 Audi RS 6 Avant. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Release the retainer -2- with a screwdriver -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the lane change assistance control module -4- from the bracket -3- in direction of -arrow-.

-- Disconnect the connector -5-.

All Vehicles Excluding RS 7 Sportback:

-- Release the retainers in direction of -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Release and remove the lane change assistance control module -1- from the shield -2-.