Line Routing And Securing
WARNING: This page is about a different car, the 2022 Audi RS 6 Avant and 2021 Audi RS 6 Avant. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Risk of damaging the lines
Damage possible on the lines due to moving or hot components.
-- Route the lines to the original wiring guide.
-- Make sure there is sufficient clearance to moving or hot components.
- Mark the individual fuel, hydraulic and vacuum lines, EVAP system as well as the wires before removing them. This will prevent interchanging them and will ensure the original installation position. Draw sketches or take pictures of them if required.