Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Audi >> 2021 >> S6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Wiper/Washer Systems) >> 92 Wiper/Washer Systems >> Windshield Washer System >> Windshield Washer Fluid Level Sensor, Removing And Installing >> Removing

Windshield Washer Fluid Level Sensor, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5, 2022 Audi RS 5, 2022 Audi A5 Quattro, 2021 Audi S5, and 2021 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the right front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Disconnect the connector -1-.

GWWA92-10399Courtesy of AUDI OF AMERICA, LLC

-- Place a drip tray under the washer fluid reservoir.

-- Remove the windshield washer fluid level sensor -3- from the windshield washer fluid reservoir.