Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Audi >> 2021 >> S6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 232 (Wiper/Washer Systems) >> 92 Wiper/Washer Systems >> Windshield Washer System >> Windshield Washer Fluid Level Sensor, Removing And Installing >> Removing

Windshield Washer Fluid Level Sensor, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the right front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Disconnect the connector -1-.

GWWA92-10399Courtesy of AUDI OF AMERICA, LLC

-- Place a drip tray under the washer fluid reservoir.

-- Remove the windshield washer fluid level sensor -3- from the windshield washer fluid reservoir.