Engine Mount, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Audi S5 Sportback, 2021 Audi S5 Sportback, and 2020 Audi S5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

Replace the bolts that were tightened with an additional turn after removing them.

-- 2.9L Engine: install the right engine support bearing. Refer to ENGINE SUPPORT BEARING, REMOVING AND INSTALLING .

-- Install the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING and RIBBED BELT, REMOVING AND INSTALLING .

-- Remove the engine support bridge. Refer to ENGINE, SUPPORTING IN INSTALLATION POSITION .