Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Audi >> 2019 >> A3 Titanium >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Wiper/Washer Systems) >> 92 Wiper/Washer Systems >> Windshield Washer System >> Windshield Washer Fluid Level Sensor, Removing And Installing >> Removing

Windshield Washer Fluid Level Sensor, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2020 Audi SQ5, 2020 Audi Q5 e, 2020 Audi Q5, 2019 Audi SQ5, and 2019 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the right front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Disconnect the connector -1-.

GWWA92-10399Courtesy of AUDI OF AMERICA, LLC

-- Remove the windshield washer fluid level sensor -3- from the windshield washer fluid reservoir.